Solar Distribution Box DC+AC 1String 1PH SPD T2 - B16 SPD T2 RCD 40A 100mA

SKU
2682
DC and AC - 1F- protection in a single housing. Self-assembly switchgear.

  • The boxes are intended for use in photovoltaic installations with or without insulated lightning protection, also where a high IP degree of protection is required.
  • Their design is suitable for surface mounting.
  • AC side single-phase, version with earth leakage circuit breaker.
Characteristics:
  • 1 x module chain per 1 mppt
  • 1 x DC surge arrester type 2
  • 1 x type 2 AC surge arrester
  • 1 x 1-phase overcurrent circuit breaker 16A
  • 1 x current circuit breaker, 100mA, type A
  • Ready to connect
  • Modular version
  • MC4 panel connections
  • Degree of protection IP65
  • Transparent door
  • Protection class II
  • Colour: white
ELECTRICAL AND MECHANICAL CHARACTERISTICS OF THE ENCLOSURE:
  • Model PHS 12T
  • Number of modules 12
  • Design in compliance with EN 60670-1, EN 62208
  • Degree of protection IP65
  • Protection class II
  • Rated insulation voltage (Ui) 400 V AC, 1500 V DC
  • 650°C glow rod test
  • Impact resistance IK08
  • UV resistant YES
  • Halogen-free recyclable plastic
DC SURGE ARRESTER USED:
  • Manufacturer/model PHOENIX/VAL-MS 1000DC-PV/2+V
  • Surge protection Type 2
  • Maximum permanent voltage UCPV 1170 V DC
  • Short-circuit immunity I SCPV 2000 A
  • Long-term operating current ICPV <20 uA
  • Rated load current IL 80 A
  • Protective conductor current IPE <=20 uA DC <=250 uA AC
  • Standby power consumption PC <=25 mVA
  • Rated discharge current (8/20) us 15 kA
  • Max. discharge current Imax (8/20) us 40 kA
  • Total discharge current Itotal (8/20) us 40 kA
  • Protection level Up <= 3.7 kV
  • Residual voltage Ures <= 3.7 kV (at In) <= 3.1 kV (at 5kA) <= 3.5 kV (at 10kA) <= 4 kV (at 20kA) <= 4.6 kV (at 30kA) <= 5 kV (at 40kA)
  • Response time tA <= 25ns Insulation resistance Riso <= 5 Gigia OM (at 500 VDC)
*In case of low stock or lack of the right product, it is replaced by an equivalent product from the OBO manufacturer with index 5094608

OVERCURRENT CIRCUIT BREAKER USED:
  • Manufacturer/model Noark/Ex9BN 1P B16
  • Rated current 16A; 1-phase
  • Rated switching voltage Ue 230/400 V AC
  • Rated withstand surge voltage Uimp 4 kV
  • Rated insulation voltage Ui 690 V AC
  • Number of poles 1
  • Frequency 50/60 Hz
  • Characteristics B
  • Design compliant with IEC/EN 60898-1, IEC/EN 60947-2
  • Rated short-circuit breaking capacity ICN 6kA
AC SURGE ARRESTER USED:
  • Manufacturer/model Noark/Ex9UE2 12.5 3PN 275
  • Design in accordance with EN 61643-11
  • Type 2 (Class II, C, T2)
  • Insertion type L-N: MOV (varistor), N-PE: GDT (spark gap)
  • Endurance voltage Uc L-N: 275 V AC, N-PE: 255 V AC
  • Frequency f 50-60Hz
  • Rated discharge current In (8/20 us) L-N: 20 kA per pole, N-PE: 40 kA per pole
  • Max. Impulse current limp (10/350 us) N-PE: 12 kA per pole
  • Max. Discharge current Imax (8/20 us) 40 kA per pole
  • Voltage protection level Up for current In L-N: 1.4 kV, N-PE: 1.5 kV
  • Voltage protection level Up for current Imax L-N: 2 kV, N-PE: 1.5 kV
  • Voltage protection level Up for 5 kA (8/20 us) L-N: 2 kV, N-PE: 1.5 kV N-PR Follow-up current suppression capacity Ifi 100A
  • Surge surges Ut (withstand) L-N: 5s : 335 V, N-PE: 200 ms : 1200 V
  • Arrester voltage for 1 mA current 387 - 473 V
  • Maximum fuse rating L-N: max. 125 A gG, N-PE: -
  • Short-circuit withstand capability L-N: 50 kA, N-P
CIRCUIT-BREAKER USED:
  • Model Ex9L-N 100mA
  • Version according to EN 61008
  • Rated switching voltage Ue 240/415 V AC
  • Min. voltage for the function of the circuit-breaker Independent of voltage
  • Voltage range for text button 150 - 440 V
  • Frequency f 50 Hz
  • Rated conditional fault current Inc 6 kA
  • Rated residual current In 100 mA
  • Sensitivity to sinusoidal and pulsed rectified differential current
  • Tripping time without delay
  • Rated withstand surge voltage Uimp 6 kV
  • Rated insulation voltage Ui 500 V
  • Surge current strength 3000 A
  • Mechanical endurance 20,000 laps
  • Electrical life 4,000 connections
  • Max. fuse overload protection In = 40A max. 32 A gG
  • Max. overload fuse protection In = 63A max. 50 A gG
  • Max. short circuit proof fuse In = 40A max. 63 A gG
  • Fuse protection against short circuit In = 63A max. 63 A gG
  • Rated breaking capacity Im (Rated differential breaking capacity IDm) In = 40A 500 A
  • Rated switching capacity Im (Rated differential switching capacity IDm) In = 63A 630 A
  • Supply direction Any (from above or below)
More Information
EAN4135265664400
ManufacturerecoABM
Weight2.620000
Warranty2
VoltageAC+DC
Number of Phase1-phase
Circuit Protection1
SPD TypesT2
Width In Number Of Modular Spacings12.00
IP CodeIP65
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
More from ecoABM
  1. Copper Tube Terminal 10mm M10
    Copper Tube Terminal 10mm M10
  2. Copper Tube Terminal 16mm M8
    Copper Tube Terminal 16mm M8
  3. Copper Tube Terminal 16mm M10
    Copper Tube Terminal 16mm M10
Copyright © 1992-present ecoABM sp. z o.o. All rights reserved.