GoodWe GW10K-ET PLUS+ Three Phase Hybrid Inverter 10kW 3PH 2MPPT


GoodWe GW10K-ET PLUS inverter + ET PLUS series 5-10 kW - Three-phase inverter for energy storage 

The ET PLUS+ series combines a number of advanced technical parameters that make it one of the most flexible hybrid inverters for residential applications on the market.

The series provides high efficiency and high charging power for optimal energy harvesting, flexible applications thanks to intelligent load control and 3-phase asymmetrical phase-to-phase capability, as well as PV system reliability and safety.

Bet on a proven, versatile solution of the highest quality that will not only allow you to expand your range of applications, but also increase your electricity self-consumption rate.

Safety and Reliability
SPD Type II (DC) surge protection can protect the DC side from lightning, saving you the cost of purchasing additional equipment. What's more, the UPS-level switching capability ensures power security and reduces the risk of power outages for critical loads, contributing to the safety and stability of the entire system.

"Battery Ready" version

The ET PLUS+ series is also available in an on-grid version with the "Battery Ready" function, which enables the inverter to activate its cooperation with energy storage at a later date with a single activation code. Prepare your home for the future development of energy storage.
Flexible energy management

Smart load management allows you to customize energy generation or prioritize energy storage charging using the PV Master app. This allows you to adapt to different daily usage scenarios. Enjoy simple and flexible energy generation and storage.
High efficiency, optimal energy consumption

With a DC oversizing of 150%, the ET PLUS series, with a maximum efficiency of up to 98.2%, is able to significantly increase daily energy yield under various solar radiation conditions.

Battery input parameters:

  • Battery type: Lithium-ion
  • Battery voltage range: (V) 180~600
  • Max. charging current (A): 25
  • Max. discharge current (A): 25
  • Lithium-ion battery charging strategy
  • Self-adaptation to BMS

PV string input parameters:

  • Max. DC input power (W): 10000
  • Max. DC input voltage (V): 1000
  • MPPT voltage range (V): 200~850
  • Starting voltage (V): 180
  • Min. input voltage (V): 210
  • MPPT range to full load (V): 380-850
  • Nominal DC input voltage (V): 620
  • Max input current (A): 12.5/12.5
  • Max. short-circuit current (A): 15.2/15.2
  • Number of MPP trackers: 2
  • Number of inputs per MPP tracker: 1/1

AC output parameters (on line):

  • Nominal apparent power output to the power grid (VA): 10000
  • Max apparent output power to mains (VA): 11000
  • Max. apparent power from the power grid (VA): 15000
  • Nominal output voltage (V): 400/380, 3L/N/PE
  • Nominal output frequency (Hz): 50/60
  • Max. AC output to mains (A): 16.5
  • Max. AC output from mains (A): 22.7
  • Output power factor ~1 (Adjustable from 0.8 leading to 0.8 lag)
  • THDi factor (@Parameters nominal) <3%. 

AC output parameters (Back-up; Optional):

  • Max. apparent power (VA): 10000
  • Peak output apparent power (VA): 16000, 60 sec.
  • Max. output current (A): 16.5
  • Nominal output voltage (V): 400/380
  • Nominal output frequency (Hz): 50/60
  • THDv coefficient (on linear load): <3%


  • Max efficiency: 98.2%
  • Max battery charging efficiency: 97.5%
  • European efficiency: 97.5% 
  • Complete with inverter includes 3-phase meter - Smart meter.
More Information
Width54.00 cm
Height69.00 cm
Length/Depth29.00 cm
Number of Phase3-phase
Power kW10.00 kW
Number of MPPT2
Start Voltage180.00 V
Max Input Current13.50 A
Max DC Voltage1,000.00 V
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
More from GoodWe
Copyright © 1992-present ecoABM sp. z o.o. All rights reserved.