Zineric ZIN-BOX Solar Distribution Box AC DC 3-5kW 1String 3PH SPD T2 + B16 SPD T2

Complete Zineric DC+AC photovoltaic switchgear for self-assembly:

Characteristics:

• 1 x module chain per 1 mppt
• 1 x T2-type DC surge arrester
• 1 x T2-type AC surge arrester
• 1 x 3-phase overcurrent circuit breaker 16A
• Ready to connect.
• Modular version
• MC4 board connections
• Degree of protection IP65
• Transparent door
• Protection class II
• Colour: white

Distribution box suitable for photovoltaic systems in the power range 6-8kW

The boxes are designed for photovoltaic installations with or without lightning protection, also where a high IP degree of protection is required.

Their design is suitable for surface mounting.

Attention:

For ease of product navigation, it has been suggested to select the modular apparatus on the AC side under the inverter power, and on the DC side under the number of MPPTs.

In each case, however, the inverter data sheet should be read in detail for correct selection of the switchgear and the appropriate Zineric switchgear should be selected by a qualified electrician.

ELECTRICAL AND MECHANICAL PARAMETERS OF THE ENCLOSURE

• Manufacturer - Noark
• Model - PHS 12T
• Number of modules - 12
• Design in accordance with - EN 60670-1, EN 62208
• Degree of protection - IP65
• Protection class - II
• Rated insulation voltage (Ui) - 690 V AC, 1000 V DC
• Glow rod test - 650°C
• Impact resistance - IK08
• Recyclable plastic - halogen-free

DC SURGE PROTECTOR T2 APPLIED

• Manufacturer / Model - PHOENIX / VAL-MS 1000DC-PV/2+V
• Surge protection - Type 2
• Maximum permanent voltage UCPV - 1170 V DC
• Short-circuit immunity I SCPV - 2000 A
• Long-term operating current ICPV - <20 uA
• Rated load current IL - 80 A
• Protective conductor current IPE - <=20 uA DC, <=250 uA AC
• Standby power consumption PC - <=25 mVA
• Rated discharge current (8/20) us - 15 kA
• Max. discharge current Imax (8/20) us - 40 kA
• Total discharge current Itotal (8/20) us - 40 kA
• Protection level Up - <= 3,7 kV
• Residual voltage Ures
• <= 3,7 kV (at In)
• <= 3,1 kV (at 5kA)
• <= 3,5 kV (at 10kA)
• <= 4 kV (at 20kA)
• <= 4,6 kV (at 30kA)
• <= 5 kV (at 40kA)
• Response time tA - <= 25ns
• Insulation resistance Riso - <= 5 Giga OM (at 500 VDC)

AC T2 SURGE ARRESTER USED

• Manufacturer - Noark
• Model - Ex9UE2 12.5 3PN 275
• Design in accordance with - EN 61643-11
• Type - Type 2 (Class II, C, T2)
• Insertion type - L-N: MOV (varistor), N-PE: GDT (spark gap)
• Endurance voltage Uc - L-N: 275 V AC, N-PE: 255 V AC
• Frequency f - 50-60Hz
• Rated discharge current In (8/20 us) - L-N: 20 kA per pole, N-PE: 40 kA per pole
• Max. Impulse current limp (10/350 us) - N-PE: 12 kA per pole
• Max. Discharge current Imax (8/20 us) - 40 kA per pole
• Voltage protection level Up for current In - L-N: 1.4 kV, N-PE: 1.5 kV
• Voltage protection level Up for current Imax - L-N: 2 kV, N-PE: 1.5 kV
• Voltage protection level Up for 5 kA (8/20 us) - L-N: 2 kV, N-PE: 1.5 kV
• N-PR fault current suppression capability Ifi - 100A
• Casual surges Ut (withstand) - L-N: 5s : 335 V, N-PE: 200 ms : 1200 V
• Arrester voltage for 1 mA current - 387 - 473 V
• Maximum fuse protection - L-N: max. 125 A gG, N-PE: -
• Short-circuit current withstand capability - L-N: 50 kA, N-PE: -

B16 3F OVERCURRENT CIRCUIT BREAKER FITTED

• Manufacturer - Noark
• Model - Ex9BN 3P B16
• Rated current - 16A; 3-phase
• Number of poles - 3
• Characteristics - B
• Compatible with - IEC/EN 60898-1
• Rated short circuit breaking capacity ICN - 6kA