Rotenso Heatmi HES160X13i R14 Heat Pump Split 16kW 3PH Indoor unit

Rotenso Heatmi HES160X13i R14 Heat Pump Split 16kW 3F In.

The Rotenso Heatmi Split 16 kW heat pump consists of:

• indoor unit: hydraulic module with the symbol HES160X13i
• outdoor unit with the HES160X3o symbol (to be purchased separately).

This is a three-phase pump with a heating capacity of 16.00 kW (A7/W35) and high energy efficiency class A++ (for 35° flow temperature) and A++ (for 55° flow temperature). The COP for the A7/W35 parameter is 4.52.

It provides high heating capacity down to an outdoor temperature of -25°C.

The maximum available water temperature in heating mode is: 65°C and in DHW mode it is: 60°C.

The pump has a 2-rotation inverter compressor. Refrigerant - R32.

In order to ensure trouble-free operation at temperatures below 0°C, the pump is equipped with a drip tray heater to prevent the condensate from freezing and the external unit from frosting, thus preventing possible damage to the fan and heat pump exchanger.

The second important piece of equipment is the compressor crankcase heater, which heats the compressor oil at temperatures below 0°C and prepares the unit for trouble-free start-up in adverse weather conditions.

This technical solution guarantees trouble-free operation and extends the service life of the compressor - the heart of the heat pump.

The Rotenso Heatmi Split 16 kW heat pump is equipped with a 9 kW modulating booster heater (3 kW +3 kW + 3 kW). In emergency situations or when temperatures are below the bivalent point, it is advisable for the pump to make use of the booster heaters when preparing hot water for central heating or DHW. It is worth knowing that the use of heaters has a beneficial effect on the durability and reliability of the heat pump.

The Rotenso Heatmi pump can be controlled from a mobile application (Tuya Smart) as well as a modern wired controller with a menu in Polish, which has a built-in room temperature sensor and a Wi-Fi module.

The Rotenso Heatmi Split 16 kW set comprises:

• HES160X3o outdoor unit (To be purchased separately)
• indoor unit HES160X13i
• wired controller
• DHW tank sensor
• plate heat exchanger
• flow sensor
• diaphragm vessel
• manometer
• water pump
• safety valve
• vent valve
• Y-type water filter

Specifications:

• Model HES160X13i
• Rotenso Heatmi series
• Compatible outdoor unit model HES160X3o
• Operation mode heating and cooling
• Outlet water temperature/ space cooling (°C)5~25
• Water leaving temperature / space heating (°C) 25~65
• Water leaving temperature / Domestic hot water (tank) (°C) 20~60
• Power supply (V-Hz, Ø) 380-420~50, 3f
• Power consumption (W) 9100
• Operating current (A) 13.1
• Sound power level (dB(A)) 44
• Electric heater \nPower supply (V-Hz, Ø) 380-420~50, 3f
• Electric heater \n-Number of heating stages (pcs.) 3
• Electric heater \nWattage (kW) 9
• Electric heater \nMaximum operating current (A) 13.3
• Net dimensions (SxGxW) (mm) 420×270×790
• Gross dimensions (SxGxW) (mm) 530×355×1035
• Net weight \nGross weight (kg) 43 / 49
• Water circulation \nWater connections (mm( (inches)) R1''
• Water circuit \nSafety valve pressure (MPa) 0.3
• Water circuit ■ Condensate drain (mm) Ф25
• Water circuit \nExpansion vessel \nTotal volume (l) 8
• Water circuit \nExpansion vessel \nUsefull capacity (l) 2.4
• Water circuit \nExpansion vessel \nMaximum pressure (MPa) 0.3
• Water circuit \nExpansion vessel \nInitial pressure 0.1
• Water circuit \nHeat exchanger / Type Plate heat exchanger
• Water circuit \nHeat exchanger / Minimum flow rate (l/min) 13.3
• Water circuit / Water pump head (m) 9
• Water pump type DC
• Cooling circuit / liquid / gas (mm) Ф9.52 / Ф15.9
• Supply lines: indoor unit (number x mm²) 5 × 4
• Control cables: indoor-indoor unit (Nr. x mm²) 2 × 0.75 (shielded)
• Generation X