Rotenso Heatmi HES100X1o R14 Heat Pump Split 10kW 1PH Outdoor unit

The Rotenso Heatmi Split 10 kW heat pump consists of

• external unit with the HES100X1o symbol
• an indoor unit: hydronic module with the HES100X13i symbol.

It is a single-phase pump with a heating capacity of 9.50 kW (A7/W35) and high energy efficiency class A+++ (for 35° flow temperature) and A++ (for 55° flow temperature). The COP for A7/W35 is as high as 4.80.

Provides high heating capacity down to an outdoor temperature of -25°C.
The maximum available water temperature in heating mode is: 65°C and in DHW mode it is: 60°C.
The pump has an inverter, 2-rotation compressor. Refrigerant - R32.

To ensure trouble-free operation at temperatures below 0°C, the pump is fitted with a drip tray heater to prevent condensate from freezing and the external unit from frosting, thus preventing possible damage to the fan and heat pump exchanger.
The second important piece of equipment is the compressor crankcase heater which, at temperatures below 0°C, heats the compressor oil and prepares the unit for trouble-free start-up in adverse weather conditions.
This technical solution guarantees fault-free operation and extends the service life of the compressor - the heart of the heat pump.

The HES100X1o heat pump is equipped with a 9 kW booster heater (available at 3f power supply) and modulating power (3 kW +3 kW + 3 kW). In emergency situations or at temperatures below the bivalent point, it is advisable for the pump to make use of booster heaters when preparing hot water for central heating or DHW. It is worth knowing that the use of heaters positively influences the durability and reliability of the heat pump.

The Rotenso Heatmi pump can be controlled via a mobile application (Tuya Smart) as well as a modern wired controller with a menu in Polish, which has a built-in room temperature sensor and Wi-Fi module.

There is a 5-year warranty on the pumps. The purchaser is provided with professional service and warranty care. The manufacturer provides free of charge start-up of the pump by an authorised service, access to a nationwide service network and fast service response time.

The Rotenso Heatmi Split 10 kW set includes

• outdoor unit HES100X1o
• indoor unit HES100X13i
• wired controller
• DHW tank sensor
• plate heat exchanger
• flow sensor
• diaphragm vessel
• manometer
• water pump
• safety valve
• vent valve
• Y-type water filter

Specifications

• Model: HES100X1o
• Rotenso Series: Heatmi
• Compatible indoor unit model: HES100X13i
• Power supply (V-Hz, Ø): 220-240~50, 1f
• Heating (A7/W35) / Efficiency (kW): 9.5
• Heating (A7/W35) / Power consumption (kW): 1.98
• Heating (A7/W35) / COP: 4.8
• Heating (A7/W45) / Efficiency (kW): 9.5
• Heating (A7/W45) / Power consumption (kW): 2.6
• Heating (A7/W45) / COP: 3.65
• Heating (A7/W55) / Efficiency (kW): 9
• Heating (A7/W55) / Power consumption (kW): 3
• Heating (A7/W55) / COP: 3
• Cooling (A35/W18) / Efficiency (kW): 9.5
• Cooling (A35/W18) / Power consumption (kW): 2.07
• Cooling (A35/W18) / EER: 4.6
• Cooling (A35/W7) / Efficiency (kW): 8
• Cooling (A35/W7) / Power consumption (kW): 2.53
• Cooling (A35/W7) / EER: 3.16
• Air-to-water ∙ Seasonal energy efficiency TWW at 35⁰C ∙ SCOP: 4.87
• Air-to-water ∙ Seasonal energy efficiency TWW at 35⁰C ∙ Rated heating output (kW): 9
• Air-to-water ∙ Seasonal energy efficiency TWW at 35⁰C ∙ Seasonal energy efficiency ratio (ηS) (%): 191.7
• Air-to-water ∙ Seasonal energy efficiency TWW at 35⁰C ∙ Annual energy consumption (kWh): 3791
• Air-water ∙ Seasonal energy efficiency TWW at 35⁰C ∙ Seasonal energy efficiency class for space heating (1): A+++
• Air-water ■ Seasonal energy efficiency TWW at 55⁰C ■ SCOP (1): 3.41
• Air-to-water ■ Seasonal energy efficiency TWW at 55⁰C ■ Rated heating output (kW): 8
• Air-to-water ∙ Seasonal energy efficiency TWW at 55⁰C ∙ Seasonal energy efficiency ratio(ηS) (%): 133.4
• Air-to-water ∙ Seasonal energy efficiency TWW at 55⁰C ∙ Annual energy consumption (kWh): 4895
• Air-to-water ∙ Seasonal energy efficiency TWW at 55⁰C ∙ Seasonal energy efficiency class for space heating (1): A++
• SEER / TWW at 7°C: 5.68
• SEER / TWW at 18°C: 8.34
• Maximum overcurrent protection (MZN) (A): 20
• Minimum circuit overload (MOO) (A): 17
• Compressor (Type): Two-rotary DC compressor
• Fan (Type): DC brushless
• Fan (Number): 1
• Refrigerant (Type): R32
• Refrigerant / GWP: 675
• Refrigerant / quantity (up to 15mb) (kg): 1.65
• Refrigerant / Quantity (up to 15 mb) (TCO2eq): 1.11
• Pipe connections / Liquid / Gas (mm (inch)): Φ9,52 / Φ15,9
• Pipe connections / Minimum installation length (m): 2
• Pipe connections / Maximum installation length (m): 30
• Pipe connections / Additional amount of medium above 15mb (g/m): 38 (L-15)
• Maximum level difference / Outdoor unit above indoor unit (m): 20
• Maximum level difference / Outdoor unit below indoor unit (m): 20
• Supply lines: outdoor unit (qty. x mm ²): 3 × 4
• Control cables: indoor-indoor unit (number x mm²): 2 × 0.75 (shielded)
• Mounting spacing (SxG) (mm): 607 × 390
• Sound pressure level (dB(A)): 50
• Sound power level (dB(A)): 61
• Net dimensions (LxWxH) (mm): 993 × 421 × 804
• Gross dimensions (LxWxH) (mm): 1022 × 480 × 835
• Net weight / Gross weight (kg): 59.5 / 63
• Outdoor operating range / (Cooling/Heating) (°C): -5~43 / -25~35
• Outdoor / DHW operating range (°C): -25~43
• Generation: X