Rotenso Aquami AQS160X13i Heat Pump 16kW Split 1-3PH Indoor unit
Rotenso Aquami 1F/3F 16KW Split heat pump AQS160X13i R13 (indoor unit)
The Rotenso Aquami Split heat pumps consist of an outdoor unit (unit) and a hydraulic module (for indoor installation).
They are sold as separate components of a kit.
The advantage of this solution is easy access to the hydraulic module and the refrigeration connection between the outdoor and indoor units is resistant to freezing, even during prolonged power failure.
modern design and high efficiency at low temperatures make the Rotenso Aquami pumps ideal for heating homes, shops, commercial premises and offices.
Air source split heat pumpThe kit
consists of two modules, one of which is installed outside and the other, called the hydrobox, inside the building.
The modules are connected by refrigeration pipes.
The indoor module is connected to the heating circuit of the building and the hot water tank.
Theadvantages of the split solution are
- easy service access (inside the building) to the automation and hydraulic components of the pump
- the heating system can be flooded with water (not at risk of freezing of the water system)
- Rated heating power: 6 / 8 / 10 / 12 / 14 / 16 kW
- Energy class: A++ (for 35°C) / A++ (for 55°C)
- COP: up to 5.2
- Extreme operating conditions down to - 25°C
- Max water temperature in heating mode: 65°C
- Max water temperature in DHW mode: 60°C
- Independent control of two heating circuits
- Flexible electric heater power 9kW (3+3+3)
- Drip tray and compressor crankcase heater
- Certification: SG Ready
- Warranty: 5 years
- Indoor unit
- Wired controller
- DHW tank sensor
- Plate heat exchanger
- Flow sensor
- Diaphragm tank
- Circulation pump
- Safety valve
- Vent valve
- Y-type water filter
You control - He will perform.
Rotenso Aquami Split offers the possibility to control the pump both from the wired controller and from the COMFORT HOME mobile app. Whether you are inside or outside the home.
Energy efficiency level: A+++ (35°C)
Rotenso Aquami Split heat pumps have the highest energy efficiency class A+++ (for a water temperature of 35°C). Such excellent operating parameters significantly contribute to low electricity consumption.
Implementation of the heating function at -25°C
The pumps are prepared for efficient operation even at extreme outdoor temperatures, even down to - 25°C.
During cold winters, they guarantee the preparation of hot water for central heating and DHW supply.
Maximum COP 5.20
The COP parameter is the ratio of the obtained heating power to the consumed electricity. It defines the heating efficiency of the heat pump.
Aquami pumps can produce more than five times the heating energy in relation to the electricity consumed.
All heat pumps are covered by a full 5-year warranty. The high quality workmanship will allow you to enjoy the reliability of your pump for many years.
The AQS160X13i hydronic module is compatible with heat pumps:
- Rotenso Aquami Split 12 kW with the symbol AQS120X1o
- Rotenso Aquami Split 12 kW with the AQS120X3o symbol
- Rotenso Aquami Split 14 kW with the symbol AQS140X1o
- Rotenso Aquami Split 14 kW with the symbol AQS140X3o
- Rotenso Aquami Split 16 kW with the symbol AQS160X1o
- Rotenso Aquami Split 16 kW with the symbol AQS160X3o
- Operating mode: Heating and cooling
- Space cooling outlet water temperature (°C): 5~25
- Outlet water temperature \nSpace heating (°C): 25~65
- Outlet water temperature ■ DHW (tank) (°C): 40～60
- Power supply (V-Hz, Ø): 220-240~50, 1f / 380-420~50, 3f
- Power consumption (W): 9095
- Operating current (A): 13,5
- Sound power level (dB(A)): 43
- Electric heater \ Power supply (V-Hz, Ø): 220-240~50, 1f / 380-420~50, 3f
- Electric heater \n-Number of heating stages (pcs.): 3
- Electric heater \nWattage (kW): 9 (3+3+3)
- Electric heater \ Maximum operating current (A): 13.3
- Net dimensions (SxWxG) (mm): 420×270×790
- Gross dimensions (SxWxG) (mm): 525×360×1050
- Net weight/Gross weight (kg): 45/51
- Water circuit Water connections (mm( (inches)): 25mm (R1") external
- Water circuit \nSafety valve pressure (MPa): 0,3
- Water circuit ■ Condensate drain (mm): Ф25
- Water circuit ■ Expansion vessel ■ Capacity (l): 8
- Water circuit ■ Expansion vessel ■ Maximum pressure (MPa): 0,3
- Water circuit `Expansion vessel Pre-pressure (MPa): 0,1
- Water circuit \nHeat exchanger / Type: plate heat exchanger
- Water circuit / Heat exchanger / Minimum flow rate (l/min): 10
- Water circuit / Water pump head (m): 9
- Water circulation \ Water pump type: DC
- Refrigerating circuit Liquid (mm): Φ9,52
- Refrigerating circuit Gas (mm): Φ15,9
- Supply lines: outdoor unit (number x mm²): 5 × 4,0
- Control cables: indoor- outdoor unit (number x mm²): 2 × 0,75