Rotenso Airmi AIS80X13i Heat Pump Split 8kW 1PH Indoor unit

The Rotenso Airmi Split 8 kW heat pump is made up of:
- indoor unit: hydronic module with the symbol AIS80X13i
- outdoor unit with the symbol: AISW80X1o (white casing) or AISB80X1o (graphite casing) or AISG80X1o (grey casing)

It is a single-phase pump with a heating capacity of 7.90 kW (A7/W35) and high energy efficiency class A++ (for a flow temperature of 35° and A++ (for a flow temperature of 55°). (for 35° flow temperature) and A++ (for 55° flow temperature). The COP for A7/W35 is 4.52.

The pump allows the control of two heating zones.

Provides high heating capacity down to an external temperature of -25°C.
The maximum available water temperature in heating mode is: 65°C and in DHW mode it is: 60°C.
The pump has an inverter, two-rotary compressor. The refrigerant is R32.

The Rotenso Airmi Split heat pump is equipped with a 9 kW modulating booster heater (3 kW +3 kW + 3 kW). In emergency situations or at temperatures below the bivalent point, it is advisable for the pump to make use of the booster heaters when preparing hot water for central heating or DHW. It is worth knowing that the use of heaters has a beneficial effect on the durability and reliability of the heat pump.

To ensure trouble-free operation at temperatures below 0°C, the pump is fitted with a drip tray heater to prevent the condensate from freezing and the external unit from frosting, thus preventing possible damage to the heat pump fan and exchanger.
The second important element of the pump's equipment is the compressor crankcase heater which, at temperatures below 0°, heats the compressor oil and prepares the unit for trouble-free start-up in adverse weather conditions.
This technical solution guarantees failure-free operation and extends the service life of the compressor - the heart of the heat pump.

The Rotenso Airmi Split pump can be controlled via a mobile application (Tuya Smart) as well as a modern wired controller with a menu in Polish, which has a built-in room temperature sensor and Wi-Fi module.

There is a 5-year warranty on the pumps. The purchaser is assured of professional service and warranty care. The manufacturer provides free pump commissioning by an authorised service, access to a nationwide service network and fast service response time.

The Rotenso Airmi Split 8 kW set comprises:
- indoor unit AIS80X13i
- outdoor unit: AISW80X1o (white casing) or AISB80X1o (graphite casing) or AISG80X1o (grey casing)
- wired controller
- DHW tank sensor
- plate heat exchanger
- flow sensor
- diaphragm vessel
- manometer
- water pump
- safety valve
- vent valve
- Y-type water filter

Specifications:

• Model: AIS80X13i
• Rotenso series: Airmi
• Compatible outdoor unit model: AIS/W/B/G/80X1o
• Operating mode: Heating and cooling
• Outlet water temperature / Room cooling (°C): 7~25
• Outlet water temperature / Space heating (°C): 25~65
• Outlet water temperature / DHW (tank) (°C): 25~60
• Power supply (V-Hz, Ø): 380-415~50, 3f
• Power consumption (W): 9090
• Operating current (A): 13,9
• Sound power level (dB(A)): 42
• Electric heater \ Power supply (V-Hz, Ø): 380-415~50, 3f
• Electric heater \n-Number of heating stages (pcs.): 3
• Electric heater \nWattage (kW): 9
• Electric heater \ Maximum operating current (A): 13.6
• Net dimensions (HxWxD) (mm): 465 × 273 × 909
• Gross dimensions (SxGxW) (mm): 525 × 345 × 960
• Net weight \nGross weight (kg): 37 / 41
• Water circulation \nWater connections (mm( (inches)): Φ33
• Water circuit \nSafety valve pressure (MPa): 0,5
• Water circuit Condensate drain (mm): Φ12,7
• Water circuit \nExpansion vessel \nTotal volume (l): 5
• Water circuit \nExpansion vessel \nTotal volume (l): 2
• Water circuit \nExpansion vessel \nMaximum pressure (MPa): 0,5
• Water circuit \nExpansion vessel: 0.15 Pre-pressure: 0.15
• Water circuit - heat exchanger / Type: plate heat exchanger
• Water circuit / Heat exchanger / Minimum flow rate (l/min): 10
• Water circuit / Water pump head (m): 9
• Water circulation ▼ Water pump type: DC inverter
• Refrigerating circuit / liquid / gas (mm): Ф9.52 / Ф15.88
• Supply lines: indoor unit (number x mm²): 5 × 4
• Control cables: indoor-indoor unit (Nr. x mm²): 2 × 0.75 (shielded)
• Generation: X