Noark 103342 Surge Protective Device Ex9UE T1+T2 12.5 4P AC 275V
SKU
2744
Noark 103342 Surge Protective Device Ex9UE T1+T2 12.5 4P AC 275V is available to buy in increments of 1
AC surge protector NOARK Ex9UE1+2 T1/T2 class B+C 12.5 4P 3F 275V
Noark Ex9UE1+2 series:
Noark Ex9UE1+2 series:
- This line of surge arresters consists of class 1+2 devices.
- They are used to protect electrical installations against direct low-intensity lightning strikes.
- Suitable for lightning protection zone LPL III, IV according to EN 62305 in a 3-phase TN-C network, where the total surge current introduced into the electrical installation is 37.5 kA and its surge can be 75 or 100 kA depending on the configuration and position of the earthing point, the earthing of the lightning protection installation and the location of the surge arrester.
- The modular design with interchangeable inserts allows quick and simple replacement of the functional modules in case they burn out, due to the frequent occurrence of surge peaks.
- Manufacturer code: 103342
- Width: 70 mm (4-pole)
- Height: 83 mm
- Face height: 45 mm
- Mounting: On standard TH-35 mm rail
- Degree of protection: IP20
- Terminals: Rail and lift
- Cross-section of connection terminals: 2.5 - 35 mm2
- Tightening torque of terminal screws: 2.0 - 3.5 Nm
- Connector rail thickness: 0.14 - 1.5 mm
- Ambient temperature: -40 - +80 °C
- Absolute altitude: ≤ 2000 m
- Climate resistance: ≤ 95 %.
- Weight: 0.11 kg (4-pole)
- Design in accordance with: EN 61643-11
- Type: Type 1+2 (Class 1+2, B+C, T1+T2)
- Rated switching voltage: 275 V AC
- Frequency: 50/60 Hz
- Number of poles: 4
EAN | 8592765033437 |
---|---|
Manufacturer | Noark Electric |
Weight | 0.600000 |
Warranty | 2 |
Voltage | AC |
Number of Phase | 3-phase |
SPD Types | T1+T2 |
Width In Number Of Modular Spacings | 4.00 |
Protection Voltage Up | 1.50 kV |
IP Code | IP20 |
Nominal Voltage | 275.00 V |
Width | 10.00 cm |
Height | 8.00 cm |
Length/Depth | 8.00 cm |
Write Your Own Review
More from Noark Electric