EBB Equipotential Bonding Busbar SWP-G1

Equalising potential bus 10x35mm SWP-G1

Characteristics:

• The single-pole bus SWP-G1, is used for potential equalisation in building structures, ensuring the correctness of the protection against electric shock.
• The SWP-G1 is suitable for the connection of conductors with untreated ends.
• It has slip-on threaded terminals that can be arranged in any configuration on the rail.
• The rail is fixed to the ground with screws. Holes are provided in the bases and the plastic cover to allow sealing.
• A label inside the cover can be used to write the connected circuits with a pen.
• The rail complies with Directive 2006/95/EC and bears the CE mark.

Application:
The SWP-G1 rail is used to make equipotential connections by connecting:

• the protective conductors of the electrical installation,
• all metallic pipework (drinking water pipes, hot water pipes, central heating pipes,
• gas pipes, etc.)
• all natural and artificial earths (foundation earths, lightning protection earths, etc.),
• metal structures and building reinforcement.

Rated data:

• Equipotential bonding bus: PE
• Standard: IEC 60947-7-2
• Rated cross-section: 35mm2
• Rated connection capacity: Wire: 10x 4...35mm2, Tape: 1x(4x30)mm
• Tightening torque of terminals: 2.5 Nm
• Ambient temperatures: -25...+55C
• Material: bases, cover / trim: ABS / brass (coating: Sn8)
• Clamps, normalia: steel (coating: Zn5)
• Colour: grey
• Weight: 306g