Daikin Altherma 3 GEO EGSAH10D9W Ground Heat Pump 10 kW
Daikin Altherma 3 GEO 10 kW ground source heat pump EGSAH10D9W
The Daikin Altherma 3 GEO EGSAH10D9W 10 kW ground source heat pump for central heating and hot water uses natural energy and advanced inverter technology to efficiently heat and provide hot water in a variety of weather conditions.
Advantages of choosing a Daikin solution:
The inverter technology used in Daikin Altherma heat pumps provides higher efficiencies compared to traditional on/off systems.
The highest level of energy efficiency is therefore achieved.
Inverter heat pump technology allows seasonal efficiencies of up to 20% over standard ground source heat pumps.
This is due to the compressor's ability to operate at partial loads, resulting in higher brine temperatures and less need for additional heaters.
There is also the advantage of quick and easy installation, which can take up to five hours thanks to the unit's compact design.
The unit combines the heating system and brine tank, which saves installation time.
The unit series is flexible and can adapt to different building needs, offering solutions for heat loads ranging from 3 to 12 kW.
The ability to replace several units with one heat pump is both practical and economical.
Daikin heat pumps are environmentally friendly and require little external space.
Bluevolution technology introduces a new generation of ground source heat pumps with R32 refrigerant, providing high efficiency and minimal impact on the environment.
The unit is equipped with a controller, allowing water temperature control up to 65°C, active cooling function, 180l stainless steel hot water tank, removable compressor module for easier installation and service, and remote control via the internet.
It provides a wide range of heating power modulation and a high seasonal coefficient of performance (SCOP) of up to 5.69 for cool climates, while keeping noise levels low.
This advanced solution provides not only efficiency and economy, but also comfort and ease of use thanks to modern technology.
Technical data
- Heat pump type: Ground source
- Purpose: Heating and domestic hot water (DHW) preparation
- Heating capacity: 9 - 9.5 kW
- Interaction with other appliances: Yes
- Energy efficiency class: A+++
- COP efficiency: 4,5 - 5
- Maximum temperature returned to the central heating or DHW system: 65°C
- Supply voltage / frequency: 400V / 50Hz
- Capacity of DHW storage tank: 180 litres
- Casing: white or silver-grey pre-coated sheet metal
- Dimensions: 1891 mm x 597 mm x 666 mm
- Weight: 222 kg
- Nominal power consumption: 1.12 kW
- Space heating - seasonal efficiency for radiator heating: 153%
- Space heating - seasonal efficiency for underfloor heating: 219%
- Domestic hot water preparation - declared water consumption profile: L
- Energy efficiency for domestic hot water preparation: 117%
- DHW storage tank - capacity: 180 litres
- DHW storage tank - heat loss: 1.2 kWh/day
- Operating range - installation space: 5°C - 35°C
- Operating range - brine side: (-10)°C - 30°C
- Operation range for central heating - water side: 5°C - 65°C
- Operating range for DHW preparation - water side: 25°C - 60°C
- Refrigerant - GWP: 675
- Refrigerant - quantity: 1.7 kg
- Sound pressure level: 29 dBA
- Recommended fuses: 16A
- Zero start-up: Included in the purchase price of the unit anywhere in Poland, by an authorised Daikin service centre
- Manufacturer: Daikin
EAN | 4024749106218 |
---|---|
Manufacturer | Daikin |
Weight | 222.000000 |
Number of Phase | 3-phase |
Refrigerants | R32 |